Laterális henger elmozdító rendszer ELPLACER

A PHP Error was encountered

Severity: Warning

Message: Illegal string offset 'bevezeto'

Filename: site/termek_tab_oldal.tpl.php

Line Number: 38

A PHP Error was encountered

Severity: Notice

Message: Uninitialized string offset: 0

Filename: site/termek_tab_oldal.tpl.php

Line Number: 38

Laterális henger elmozdító rendszer

  • Position detection of the web edges is performed using a CCD line scan camera of infrared sensor
  • The standardized CAN bus guaranteed secure and quick data transmission
  • The  arrangement of the function groups as well as the membrane keypad with clearly understandable symbols and LED indicators ensure simple, error-free operation

Technikai Adatok

  • Position detection of the web edges is performed using a CCD line scan camera of infrared sensor
  • The standardized CAN bus guaranteed secure and quick data transmission
  • The  arrangement of the function groups as well as the membrane keypad with clearly understandable symbols and LED indicators ensure simple, error-free operation.

Technikai Adatok

  • Use in the tire industry
  • Infrared edge sensor based on the principle of retroreflection
  • Distance-independent edge evaluation based on parallel light beams
  • Exposure controller for the compensation of soiling
  • Measuring range: ±10 mm; resolution: 0.02 mm; linearity: ±0.1 mm 

Technikai Adatok

  • Positioning and follow-up control system for spreaders, suction nozzles, cutting or marking devices as well as edge lifters
  • Position detection with ultrasonic, infrared or line sensor
  • Digital position controller to activate the motor adjustment
  • Precise linear guide with a motorized carriage

Technikai Adatok

  • Reliable web tension monitoring helps avoid web tears and thus reduce producion costs.
  • E+L load cells continuously record the tension in the moving web and supply this value as an analog signal. As such, they provide the prerequisite for reliable web tension measuring and control.

Technikai Adatok

  • Position-independent installation due to various mounting options such as flange bearings, pedestal bearings, inner or outer fastening
  • Maximum operational reliability due to overload protection up to 20 times the nominal measuring force
  • Different shaft diameters from 12 to 65 mm and nominal measuring forces from 0.05 to 10 kN ensure a high degree of flexibility
  • In case of horizontal measuring direction, no influence on the measuring result due to the weight of the roller
  • Good temperature behavior and a high degree of linearity of the measuring elements due to strain gauge application on a flat surface

Technikai Adatok

  • Flange load cell in stainless steel for difficult ambient conditions, e.g. etching units and washing machines 
  • Multi-position, easy mounting due to various assembly options, e.g. flange bearings, pedestal bearings, inner or outer fastening 
  • Maximum operational reliability due to overload protection up to 20 times the nominal measuring force 
  • In case of horizontal measuring direction, no influence on the measuring result due to the weight of the roller 
  • Good temperature behavior and a high degree of linearity of the measuring elements due to the use of strain gauge application on a flat surface

Technikai Adatok

  • Economical aluminum flange load cell 
  • Compatible with stand series PD 21/22 
  • Multi-position, easy mounting due to various assembly options, e.g. flange bearings, pedestal bearings, inner or outer fastening 
  • Maximum operational reliability due to overload protection up to 10 times the nominal measuring force 
  • In case of horizontal measuring direction, no influence on the measuring result due to the weight of the roller

Technikai Adatok

  • For use on universal industrial systems for transmission of the web tension on running webs to web tension sensors
  • Aluminum roller mounted on outer bearings for PD 21/25 flange load cell assembly 
  • Various surfaces for a wide range of implementation areas 
  • Minimum concentricity tolerances and high balance quality 
  • Roller diameter from 80 to 200 mm

Technikai Adatok

  • Used for connecting two fabric tension sensors with a strain gauge bridge
  • Single-channel measuring amplifier for connecting two fabric tension sensors with a strain gauge bridge
  • Precision instrument amplifier with low temperature drift, high long-term stability and excellent linearity
  • With potentiometer for zero point and tare adjustment as well as amplification setting
  • Internal reference voltage for measuring amplifier calibration without reference weights given exact knowledge of the wrapping angle and mounting position

Technikai Adatok

  • Digital two-channel measuring amplifier with display for the connection of 2 load cells with strain gauge bridge
  • Menu-controlled, language-neutral commissioning wizard
  • X-t writing process for long-time display of the web tension
  • Monitoring of the web tension for settable limit values with digital alarm output
  • Analog output of the actual web tension values

Technikai Adatok

  • For use in the paper, film and textile industry 
  • Simple and fast commissioning of the web tension control 
  • Variable control structure for different application scenarios: "open loop" and "closed loop"

Technikai Adatok

  • Voltage/pressure converter to activate pneumatic brakes 
  • Actuation of one, two, four or six sets of brakes (depending on the version)
  • Double filter system for increased operational safety and reliability

Technikai Adatok

  • Aluminum roller with fixed axis and two integrated load cells 
  • For easy assembly between side walls. Optionally with securing kit or snug-fit shoulder screws 
  • Maximum operational reliability due to overload protection up to 10 times the nominal measuring force 
  • Different roller diameters from 80 to 200 mm ensure maximum flexibility 
  • The roller weight does not influence the measuring result, assuming a horizontal direction of measuring

Technikai Adatok

  • Aluminum roller with fixed axis and 2 integrated load cells 
  • Assembly flange at one end for cantilever mounting •
  • Maximum operational reliability due to overload protection up to 10 times the nominal measuring force 
  • Different roller diameters from 60 to 120 mm ensure maximum flexibility 
  • In case of horizontal measuring direction, no influence on the measuring result due to the weight of the roller

Technikai Adatok

  • Contact-free surface weight and thickness measurement across the entire web width for the film and paper industry
  • Measuring range: Thickness 0.800 µm or basis weight 0-800 g/m²
  • Ultrasonic technology, no additional protection measures required
  • High measuring accuracy with a resolution up to 0.001 µm
  • Measuring method independent of substrate height variation

Technikai Adatok

  • Traversing and contact-free surface weight and thickness measurement for the film and paper industry
  • Measuring range: Thickness 0-800 µm or basis weight 0-800 g/m²
  • Ultrasonic technology, no additional protection measures required
  • High measuring accuracy with a resolution up to 0.001 µm
  • Measuring method independent of substrate height variations

Technikai Adatok

  • Contact-free surface weight and thickness measurement across the entire web width for the film and paper industry 
  • Measuring range: Thickness 0-5000 µm or basis weight 0-5000 g/m²
  • Ultrasonic technology, no additional protection measures required
  • High measuring accuracy with a resolution up to 0.001 µm
  • Measuring method independent of substrate height variations

Technikai Adatok

  • Traversing and contact-free surface weight and thickness measurement for the film and paper industry 
  • Measuring range: Thickness 0-5000 µm or basis weight 0-5000 g/m²
  • Ultrasonic technology, no additional protection measures required
  • High measuring accuracy with a resolution up to 0.001 µm
  • Measuring method independent of substrate height variations

Technikai Adatok

  • Camera system for 200% inspection on printing and finishing machines in label applications and narrow-web applications
  • Safe defect detection through special LED illumination concept
  • Suitable for paper labels and for transparent and clear-on-clear labels and glossy films
  • Simple system integration (no external technician required)
  • Time-saving and rapid operating concept

Technikai Adatok

Érzékelők

  • Position detection of the web edges is performed using a CCD line scan camera of infrared sensor
  • The standardized CAN bus guaranteed secure and quick data transmission
  • The  arrangement of the function groups as well as the membrane keypad with clearly understandable symbols and LED indicators ensure simple, error-free operation

Technikai Adatok

  • Position detection of the web edges is performed using a CCD line scan camera of infrared sensor
  • The standardized CAN bus guaranteed secure and quick data transmission
  • The  arrangement of the function groups as well as the membrane keypad with clearly understandable symbols and LED indicators ensure simple, error-free operation.

Technikai Adatok

  • Use in the tire industry
  • Infrared edge sensor based on the principle of retroreflection
  • Distance-independent edge evaluation based on parallel light beams
  • Exposure controller for the compensation of soiling
  • Measuring range: ±10 mm; resolution: 0.02 mm; linearity: ±0.1 mm 

Technikai Adatok

  • Positioning and follow-up control system for spreaders, suction nozzles, cutting or marking devices as well as edge lifters
  • Position detection with ultrasonic, infrared or line sensor
  • Digital position controller to activate the motor adjustment
  • Precise linear guide with a motorized carriage

Technikai Adatok

  • Reliable web tension monitoring helps avoid web tears and thus reduce producion costs.
  • E+L load cells continuously record the tension in the moving web and supply this value as an analog signal. As such, they provide the prerequisite for reliable web tension measuring and control.

Technikai Adatok

  • Position-independent installation due to various mounting options such as flange bearings, pedestal bearings, inner or outer fastening
  • Maximum operational reliability due to overload protection up to 20 times the nominal measuring force
  • Different shaft diameters from 12 to 65 mm and nominal measuring forces from 0.05 to 10 kN ensure a high degree of flexibility
  • In case of horizontal measuring direction, no influence on the measuring result due to the weight of the roller
  • Good temperature behavior and a high degree of linearity of the measuring elements due to strain gauge application on a flat surface

Technikai Adatok

  • Flange load cell in stainless steel for difficult ambient conditions, e.g. etching units and washing machines 
  • Multi-position, easy mounting due to various assembly options, e.g. flange bearings, pedestal bearings, inner or outer fastening 
  • Maximum operational reliability due to overload protection up to 20 times the nominal measuring force 
  • In case of horizontal measuring direction, no influence on the measuring result due to the weight of the roller 
  • Good temperature behavior and a high degree of linearity of the measuring elements due to the use of strain gauge application on a flat surface

Technikai Adatok

  • Economical aluminum flange load cell 
  • Compatible with stand series PD 21/22 
  • Multi-position, easy mounting due to various assembly options, e.g. flange bearings, pedestal bearings, inner or outer fastening 
  • Maximum operational reliability due to overload protection up to 10 times the nominal measuring force 
  • In case of horizontal measuring direction, no influence on the measuring result due to the weight of the roller

Technikai Adatok

  • For use on universal industrial systems for transmission of the web tension on running webs to web tension sensors
  • Aluminum roller mounted on outer bearings for PD 21/25 flange load cell assembly 
  • Various surfaces for a wide range of implementation areas 
  • Minimum concentricity tolerances and high balance quality 
  • Roller diameter from 80 to 200 mm

Technikai Adatok

  • Used for connecting two fabric tension sensors with a strain gauge bridge
  • Single-channel measuring amplifier for connecting two fabric tension sensors with a strain gauge bridge
  • Precision instrument amplifier with low temperature drift, high long-term stability and excellent linearity
  • With potentiometer for zero point and tare adjustment as well as amplification setting
  • Internal reference voltage for measuring amplifier calibration without reference weights given exact knowledge of the wrapping angle and mounting position

Technikai Adatok

  • Digital two-channel measuring amplifier with display for the connection of 2 load cells with strain gauge bridge
  • Menu-controlled, language-neutral commissioning wizard
  • X-t writing process for long-time display of the web tension
  • Monitoring of the web tension for settable limit values with digital alarm output
  • Analog output of the actual web tension values

Technikai Adatok

  • For use in the paper, film and textile industry 
  • Simple and fast commissioning of the web tension control 
  • Variable control structure for different application scenarios: "open loop" and "closed loop"

Technikai Adatok

  • Voltage/pressure converter to activate pneumatic brakes 
  • Actuation of one, two, four or six sets of brakes (depending on the version)
  • Double filter system for increased operational safety and reliability

Technikai Adatok

  • Aluminum roller with fixed axis and two integrated load cells 
  • For easy assembly between side walls. Optionally with securing kit or snug-fit shoulder screws 
  • Maximum operational reliability due to overload protection up to 10 times the nominal measuring force 
  • Different roller diameters from 80 to 200 mm ensure maximum flexibility 
  • The roller weight does not influence the measuring result, assuming a horizontal direction of measuring

Technikai Adatok

  • Aluminum roller with fixed axis and 2 integrated load cells 
  • Assembly flange at one end for cantilever mounting •
  • Maximum operational reliability due to overload protection up to 10 times the nominal measuring force 
  • Different roller diameters from 60 to 120 mm ensure maximum flexibility 
  • In case of horizontal measuring direction, no influence on the measuring result due to the weight of the roller

Technikai Adatok

  • Contact-free surface weight and thickness measurement across the entire web width for the film and paper industry
  • Measuring range: Thickness 0.800 µm or basis weight 0-800 g/m²
  • Ultrasonic technology, no additional protection measures required
  • High measuring accuracy with a resolution up to 0.001 µm
  • Measuring method independent of substrate height variation

Technikai Adatok

  • Traversing and contact-free surface weight and thickness measurement for the film and paper industry
  • Measuring range: Thickness 0-800 µm or basis weight 0-800 g/m²
  • Ultrasonic technology, no additional protection measures required
  • High measuring accuracy with a resolution up to 0.001 µm
  • Measuring method independent of substrate height variations

Technikai Adatok

  • Contact-free surface weight and thickness measurement across the entire web width for the film and paper industry 
  • Measuring range: Thickness 0-5000 µm or basis weight 0-5000 g/m²
  • Ultrasonic technology, no additional protection measures required
  • High measuring accuracy with a resolution up to 0.001 µm
  • Measuring method independent of substrate height variations

Technikai Adatok

  • Traversing and contact-free surface weight and thickness measurement for the film and paper industry 
  • Measuring range: Thickness 0-5000 µm or basis weight 0-5000 g/m²
  • Ultrasonic technology, no additional protection measures required
  • High measuring accuracy with a resolution up to 0.001 µm
  • Measuring method independent of substrate height variations

Technikai Adatok

  • Camera system for 200% inspection on printing and finishing machines in label applications and narrow-web applications
  • Safe defect detection through special LED illumination concept
  • Suitable for paper labels and for transparent and clear-on-clear labels and glossy films
  • Simple system integration (no external technician required)
  • Time-saving and rapid operating concept

Technikai Adatok

Pozicionáló és irányító állomás

  • For use with web guiding systems in the paper and film industry
  • Multiple operation of up to eight web guiding control loops
  • Selection of the country-specific language
  • Integrated backup option to save the device setting 
  • Intuitive operation
  • User-friendly commissioning via configuration wizard

Technikai Adatok

Kapcsolatfelvétel / ajánlatkérő